 |
I used marine hose named Shieldsflex II as my main coolant lines. | |
 |
It has a steel coil impregnated in the rubber which makes it very strong and bendable without kinking. | |
 |
See the steel coil sticking out. | |
 |
KEP recommends a T junction on the return line from the rad. I used a brass junction used under kitchen sinks as dishwasher adapter (provides a side inlet). I cut the top rim off as show in the picture. |
|
 |
The existing VW coolant distribution tower has to go. Here I a starting to peel it away. Its very thin metal. That tube hanging down in the foreground is the gas feed line. |
|